Products
GRAPHITE REMOVER IG123
IG 112 is specially formulated for very strong cleaning of tags, graffiti, old paints and varnishes applied to materials such as paint, facades, stone, wood and some plastic surfaces. Works very well also on glass surfaces, and gives steel a shiny protective surface.
The product is environmentally friendly!
The product is sold in: 1l, 5l, 10 and 20l canisters
Prices from: €30/L
GRAPHITE REMOVER: IG112 -STRONG
IG 112 is specially formulated for very strong cleaning of tags, graffiti, old paints and varnishes applied to materials such as paint, facades, stone, wood and some plastic surfaces.
It is suitable for use on large surfaces mainly due to its slow evaporation. It is ideal for highly efficient and economical removal of many different paints, but also for two-component systems, thermosetting systems and even cellulose-based systems, acrylic resins, vinyls, aminoplasts, polyesters, phenolics, one- and two-component systems. -component epoxy resins and polyurethanes, in industry. Significantly improves safety conditions, economic conditions due to low evaporation loss and working conditions due to very easy application.
GAS METER H2S
- Type of gas: H2S
- Perceptibility: Diffusion
- Measurement accuracy: 0-100ppm
- Resolution: 0.1ppm, 0.001ppm
- Reaction time: ≤30s(T90)
- Accuracy: ± 3% F.S.
- Alarm modes:
- Sound, light, vibration alarm, high and low alarm values can be set yourself
- Alarm modes: Low alarm, high alarm, STEL, TWA, low battery
- Battery: 3.6v non-rechargeable battery
- Explosion resistance class: ExiaIICT4Ga
- Protection class: IP68
- Standards: GB 12358-2006, GB 3836.1-2010, GB 3836.4-2010, JJF1421-2013, JJF1363-2019, JJF1364-2012, JJG 365-2008, IEC 60079-0-2017, IEC 60079-11-2
- Operating temperature: -20 – 55℃
- Humidity: 0-95%RH (non-condensing)
- Max air pressure: 86~106kpa
- Dimensions: 90*60*33mm
Weight: 125g
Service and calibration of this device through us.
Mini-X is IECEX/ATEX/EMC certified single gas detector. It can detect hundreds of user-selected toxicants
gases, user-friendly and easy to use. Battery and the sensor is replaceable to provide the user with a long term
protect. It is designed to provide low cost and long-term ownership gas monitoring system.
– IP68 water and dust resistant housing
– Low power consumption with a standby time of 2 years, no battery charging and calibration required
– Single/multi unit docking station that operates daily shock test and calibration (Accessory)
– With event and data log function (Accessory)
– With a self-test function that can improve safety automatic self-test
– Small size, lightweight and back holder for easy carrying
– 95db@30cm buzzer alarm, 2 very bright red LED lights alarm and vibration alarm
– Real time value, TWA, STE L, MAX, MIN multi-digit display.
Optional docking station available for calibration and maintenance.
This meter can be serviced after 2 years of use, so there is no need to buy a new one!
Price: € 205 ( €165.32 VAT 0% )
MULTI GAS METER- SG3000
A personal four-gas meter with which it is possible to detect dangerous gas concentrations. With the detector it is possible to detect gases: H2S (hydrogen sulphide), CO (carbon monoxide). O2 (oxygen), Ex (flammable gases
The meter can be calibrated and maintained, so the service life is decades*
Service and calibration of this device through us.
The SG3000 is an IECEX/ATEX/EMC certified portable multifunction device
gas detector. It is a suction type with a built-in pump that detects
Up to 6 gas types and all in one device.
The most important qualities:
- CO H2S O2 LEL
- Can be recalibrated (long service life!)
- IP67 water and dust resistant and 3 meter drop resistant
case, strong and durable shell - Test automatically
- Security: man down alarm function
and calibrate with power on: - Accuracy: ≤±1-5 %F.S excluding special gases
- Reaction time: T＜20s
- Display: LCD display shows real-time and system status;
LED, sound and vibration alarm for gas leak, fault and low voltage - Operating temperature: -20℃～50℃ (Poisonous gases)
- Power: 3.7V rechargeable lithium battery, battery capacity 2200mA
- Operating time: ≧15h
- Charging time: approx. 4h
- Sensor lifetime: 2 years
- Protection: IP67
- Weight: 365g with battery
- Dimensions: 100mm×60mm×30mm
- Certificate: 2004/34/UE (ATEX)
- The device is delivered in a briefcase with a charger.
- Optional docking station available for calibration and maintenance.
Very high-quality and calibratable device.
Price: €699 ( €563.71 VAT0% )
Laser cleaning SLP-500PMB MOPA
- Power: 500W
- MOPA
- Wavelength: 1064 Nm
- Cleaning head: 1.8kg
- Touch screen size: 7”
- Multi beam
- Intermediate cable
- length: 10m
- Length of working area: 1-200mm
- Width of working area: 1-20mm
- Machine weight: 100kg
- External dimensions: 616*370*840mm
- Max. input power: 5000W
- Water-cooled
- Electrical connection: Single-phase 220VAC ± 10%, 50-60Hz
- Accessories: Ask the seller for more
- Two-year factory warranty.
Request an offer!
Laser cleaning SLP-CW2000MB
- Power: 2000W
- Wavelength: 1080 nm
- Multi beam
- Scanning width: 50-300mm
- Touch screen: 7″
- Cleaning head: 1.4 kg
- Cable length: 10 / 15m
- Electrical connection: 3-gear 380VAC ± 10%, 50-60Hz
- Cooling: Water
Weight: 200 kg - Multilingual menu e.g.: Finnish, English, Estonian, Swedish
- Accessories: Ask the seller for more information
- Two-year factory warranty.
Flexible leasing contract available for all models
Ask more about our customer service.
Laser cleaning SLP-300PMB MOPA
- Power: 300W
- MOPA
- Wavelength: 1064 Nm
- Max Pulse energy: 13mJ
- Cleaning head: 450g
- Touch screen size: 7”
- Multi beam
- Intermediate cable
- length: 10m
- Cleaning width: 10-170mm
- Machine weight: 100kg
- External dimensions: 550*650*740mm
- Max. input power: 3000W
- Water-cooled
- Electrical connection: Single-phase 220VAC ± 10%, 50-60Hz
- Accessories: Ask the seller for more
- Two-year factory warranty.
